Mask for American Girl Doll

See my other beach item tutorials

 

What you need

• 1/8" plexiglass (acrylic glass) sheet (got mine at Home Depot)
• clear plastic binder or poly binder or flexible cutting board or similar
• colored plastic binder or poly binder or flexible cutting board (e.g same as fins)
• 1/4" elastic or clear elastic strap
• hot glue gun
• coping saw (to cut plexiglass with)
• Sculpey or FIMO
• vegetable oil

How to make the mask

 1. Download free pattern here
     Remember to set page scaling to none.
     For home use only !!!!!

2. Cut out lens pattern from plexiglass

3. Cut out side pattern from poly binder

4. Lay lens on silicone mat and glue side to lens with hot glue
    Leave lens on mat that way you will have a nice straight finish in front

5. Draw outline of mask onto colored cutting board or binder and make a rim, then cut.

6. Take FIMO or Sculpey and form a nose part, bake according to manufacturer directions.

7. After Sculpey has cooled, cover with vegetable oil, then cover with hot glue.
    On a silicone mat would be best for this.
    Let hot glue cool, then remove Sculpey nose.
    Cut hot glue nose to fit mask and glue with hot glue to mask.

8. Glue rim to mask lens.

9. Cut slits in side of mask and attach elastic string.


You are done !!!


Return to see my other beach item  tutorials

Snorkel for American Girl Doll

See my other free Beach item tutorials

 

What you need

• plastic clothes hanger
• snips or handsaw to cut the plastic hanger 
• Glue or hot glue gun
• paint for plastic (optional)
• scrap piece of foam sheet (for mouth piece)
• electrical or duck tape (optional)
• drill (optional)

How to make the snorkel

1. Paint this section of the hanger and let dry
    (I paint it while it is still a hanger, that way I can  hang it up while it dries)

2. Cut about 6" on straight part and past the bend.

3. Optional you could drill in on the straight end for 1/2" or so. This will make it look like a tube.
   (use a drill bit smaller than the hanger diameter)

4. Take the foam and cut an oval about 3/4" x 1/2"

5. Cut 2 little squares from foam to form the "bite" of the mouth piece and glue on oval

6. Glue oval to curved part of the hanger

7. Take electrical tape and wrap once around 1/4" down from straight end.
    This is the part that is normally seen above water.

8. You can use a rubber band to attach to mask


You are done !!!

See my other free Beach item tutorials

Harry Potter Accessories for American Girl Doll

 See my other free Harry Potter tutorials



Here are a couple of things I found to complete your Harry Potter theme


I found Hedwig's cage as a tea light holder at Michaels or a similar one at Amazon
(search for Bird cage tea light on google)

You can make Hedwig from polymer clay (for the body) and feathers or get a white owl from
e.g. Snowy Owl from Schleich or Snowy Owl from Bullyland

A trunk at Hobby Lobby, the web site says you can only buy it as a set but I was able to buy the smallest one in the store separately.

The chocolate frog card you can find in my blog, the frog I made from polymer clay .

The marauder's map you can find on my blog as well.

Puzzles and games for American Girl Doll

Puzzles

Download free puzzle here








Download free puzzle here

Download free puzzle here











Download free puzzle here

Download free puzzle here

Games

 Download free game checkers and morris

Hospital IV and stand for American Girl doll

See my other hospital item tutorials

 

What you need

• freezer zip lock bag (or other clear sturdy plastic)
• clear elastic jewelery thread or thick fishing line (about 1.3mm)
• hot glue gun
• Acrylic Water (got mine at Walmart)
• Elmer's glue (optional)
• 4 Jumbo craft sticks
• 5/8" wooden dowel (18" long)
• 2 small nails
• small eyelet (optional)
• metallic colored paint (optional)

How to make the IV bag

1. Take a piece of paper and draw the outline of your IV bag.
    Mine was 3 1/4" high and 2" wide as you can see below

2. Cut open your Ziplock bag along one seams and lay one side over your drawing.

3. Lay piece of jewelery thread or fishing line onto the Ziplock bag at the bottom,
   where the IV line will come out (mine has blue sparkles so you can see it better)

4. Put a bead of hot glue on the outline of the IV bag.
    Make sure you leave the top open !!!

5. Take the other Ziplock bag piece and press it onto the glue.

6. After glue has cooled, fill IV bag with water to check for leaks. Fix any leaks.

7. Empty water and dry IV bag, then fill the IV bag 2/3 with acrylic water,
    hang it up, the way the bag will be hanging and let acrylic water set (24 - 48h)

8. After acrylic water has cured glue the top seam together

9. Create a little hole in the top and strengthen with eyelet (optional)

10. If you want you can put a small glop of hot glue about 1/3 down around the IV line.
      This can be the switch.

How to make the IV stand

1.  Take a craft sticks and cut in center, then remove half your width on both cut sides.
     Repeat for second craft stick.

2. Take whole craft stick and 2 halves and glue halves on either end,
    Repeat for the other one.

3. Take both finished sticks and glue them onto each other forming a cross.

4. Glue and nail dowel onto center of cross.

5. Bend nail in the middle at 90 and nail into top of dowel. This is where the IV bag will be hanged.

6. Paint silver if you want

You are done !!!


See my other hospital item tutorials for American Girl dolls

X-Ray pictures for American Girl Doll

See my other hospital item tutorials

What you need

• X-ray picture from google
• clear packaging tape

How to make the X-Ray pictures

1. Go to google and look for X-ray pictures for your arm or leg or whatever you want.

2. Resize them so that the bones somewhat match the size of your American Girl Doll
    You could use Microsoft Word or a similar computer program, they have rules for sizing.

3. Print

4. Put clear packaging tape on front and back


You are done !!!

Band-Aid for American Girl Doll

See my other hospital item tutorials

  

What you need

• Brown/Tan colored medical tape (I got mine at Target, see below)
• Toilette paper or paper towel

How to make the Band-Aid

1. I got the following medical tape from Target. This one is really great, it doesn't really have glue on it.

    It is just sticky.

 

2. Cut strips 1" x 3/8" and round corners

3. Take a little square of toilette paper or paper towel and add in the center

You are done !!!!