What you need
- brown suede fabric for dress and moccasins (around 18" x 40")
- Velcro 5 1/2" long 1/4" wide
- decorations for your dress (be creative, this is what I used)
- 6 white, 15 blue and 11 red beads (5mm)
- 5 beads that look like elk teeth (I got mine at Ben Franklins called Beader's Paradise - Czech glass & stone chips, almond delight, in this collection are some beads that look like elk teeth)
- feather (bone or plastic)
- little glass tubes in dark blue ( I got mine at Joann Fabrics called Darice 10/0 Bugle Beads - 100gr/Multi)
- suede cording 3mm beige
- necklace
- red, green and blue glass tubes, see above
- white beads (3mm)
- closure
- 2 pearl buttons for hair band and black elastic string
How to make the dress
download free pattern for dress and moccasins here
Please use the pattern for home use only !
This pattern is copyrighted by me, Read Creations.
Make sure you have page scaling set to none !
Cut all pieces from paper and tape together part A and B along blue line, same with part D and E to create the front (A/B) and back (D/E)
I had this dress made a while back so I can't show each step, but I took pictures of the relevant areas of the finished dress, so disregard the decorations, they will come later.
1. Cut front (A/B) on fold 1x, back (D/E) 2x, C on fold 1x and F 2x
2. Top stitch part C onto front (A/B) where indicated (wrong side of C onto right side of A/B). This fabric doesn't fray, so we don't need to worry about that, just sew about 1/8" in.
Do the same for both back sides (F onto D/E)
3. Sew shoulder pieces right sides together (shoulder on AB to shoulder on DE on both sides), make sure you don't sew the neck opening shut (marked between the black dots). Just sew from the black dot outward to the red dotted line.
4. Sew Velcro onto both back (D/E) parts, about 1/2" down from the top (soft Velcro on right side of fabric folded over inwards, rough Velcro on right side of fabric) You will have the rough Velcro facing you on the left side of the dress back and the soft Velcro, facing away from you on the right side of the dress, the picture explains it better than my words)
5. Top stitch neck opening (fold the shoulder seams apart and keep this seam all around)
6. Sew the two back (D/E) pieces together (right sides together) from the Velcro down to the red line (about 1" from the bottom of the dress)
7. Lay front (A/B) and merged back piece (D/E) on top of each other, wrong sides together and stitch along the sides between the two black dots (about 1" from the side). You will be sewing on the right side of the fabric, this seam will be visible!
8. Cut about 1" deep (just up to the seam you just did, but don't cut it!) 1/8" wide fringes all around (sleeves, sides and bottom)
Your dress is done, now it needs decorating !!!
How to decorate the dress
This is what I did to give you an idea. Be creative !
1. Take the dark blue glass tubes and sew them onto the dress just slightly offset from parts C and F starting in the back, all around the front and and ending on the other side in the back.
2. Take the suede cording and cut 3 pieces at 4 1/2" long
3. Cut the 3 pieces lengthwise in half (you will need 5 of the 6 pieces)
4. Add 1 red and 3 blue beads
5. Make a knot on both ends, about 1/4" inwards
6. Move the 3 blue beads to one end and sew on the "elk tooth" to the opposite knot (I couldn't thread the "elk tooth" bead on the suede cord, that's why I sewed it on the knot)
7. Move the red bead about 2 1/2" from the end of the blue beads side (this will be not in the center since the blue beads' side is going to be longer)
8. Bend both sides down around the red bead and wrap a thread around multiple times just below the bead, then sew the red bead onto the dress according to step 9
9. Go in 2 rows, 3 beads in the bottom row (around 3 1/2" from bottom of dress), 2 beads offset in the top row (around 4 1/2" from bottom of dress)
10. Take the suede cording and cut a 9" piece off
11. Thread the suede cord onto the feather to about 5" from one end (not the middle !)
12. Cut the cord lengthwise in half up to the feather on both sides (where the feather is, it is uncut for about 1/4")
13. Thread 3 white beads on each of the longer sides
14. Thread 3 red beads on each of the shorter sides
15. Take a red and white side together and sew onto dress, then take the other red and white side and sew onto dress on the other side of the feather, make sure you center the feather
Decorations are done !!!
How to make the moccasins
1. Take two of the soles and put right sides together
2. Sew along the outside (long sides and front curve), don't sew the back straight section
3. Turn inside out, so the right side is facing you
4. Top stitch from the back for 2 1/2" on both sides (stop just before the curve)
5. Hand stitch along the curved front (start 2 1/2" from the back until 2 1/2" from the other side end) and pull to gather fabric (I used double thread to be able to pull hard enough without ripping the thread), after gathering knot thread so the gathered fabric won't come undone
(this picture has already the tongue sewn in)
6. Fold the back straight section in half and sew in a slight curve (instead of just straight down), cut off excess material at the rounded bottom.
7. Turn inside out, so seam is inside
8. Take tongue and hand stitch inside (I had the doll wear the shoe and stitched it while she was wearing it, that way I knew I had a good fit and I was able to make some last minute adjustments to the gather to make it look good)
Now repeat steps 1 - 8 for your other shoe and you are done.
You can stitch some mini beads on the tongue for decorations if you like.
How to make the necklace
I wanted it to look like Kaya's necklace and made 3 stands of 3 different lengths
The first one is the longest (10 1/2") and alternates 2 green glass tubes and 2 white beads
The next one (9") alternates 2 blue glass tubes and 2 white beads
The last one is the shortest (8") and alternates 2 red glass tubes and 2 white beads
I tied all 3 strands together on both ends, added 2 white (5mm) beads on each end and added a closure
You are done with your necklace !!!
How to make the pearl hair bands
I got these pearl buttons at Joann Fabrics and just used black elastic string to create a loop long enough to get the hair through 2x.
For more Native American items see my
blog
