Pages

July 03, 2013

Hospital IV and stand for American Girl doll



 

What you need

  • freezer zip lock bag (or other clear sturdy plastic)
  • clear elastic jewelery thread or thick fishing line (about 1.3mm)
  • hot glue gun
  • Acrylic Water (got mine at Walmart)
  • Elmer's glue (optional)
  • 4 Jumbo craft sticks
  • 5/8" wooden dowel (18" long)
  • 2 small nails
  • small eyelet (optional)
  • metallic colored paint (optional)

How to make the IV bag

1. Take a piece of paper and draw the outline of your IV bag.
    Mine was 3 1/4" high and 2" wide as you can see below

2. Cut open your Ziplock bag along one seams and lay one side over your drawing.

3. Lay piece of jewelery thread or fishing line onto the Ziplock bag at the bottom,
   where the IV line will come out (mine has blue sparkles so you can see it better)

4. Put a bead of hot glue on the outline of the IV bag.
    Make sure you leave the top open !!!


5. Take the other Ziplock bag piece and press it onto the glue.

6. After glue has cooled, fill IV bag with water to check for leaks. Fix any leaks.

7. Empty water and dry IV bag, then fill the IV bag 2/3 with acrylic water,
    hang it up, the way the bag will be hanging and let acrylic water set (24 - 48h)

8. After acrylic water has cured glue the top seam together

9. Create a little hole in the top and strengthen with eyelet (optional)

10. If you want you can put a small glop of hot glue about 1/3 down around the IV line.
      This can be the switch.


How to make the IV stand

1.  Take a craft sticks and cut in center, then remove half your width on both cut sides.
     Repeat for second craft stick.

2. Take whole craft stick and 2 halves and glue halves on either end,
    Repeat for the other one.

3. Take both finished sticks and glue them onto each other forming a cross.

4. Glue and nail dowel onto center of cross.

5. Bend nail in the middle at 90 and nail into top of dowel. This is where the IV bag will be hanged.

6. Paint silver if you want



You are done !!!


See my other hospital item tutorials for American Girl dolls

13 comments:

  1. What could you possibly use other than acrylic water?
    BTW I love your carfts always, waiting for what comes next!

    ReplyDelete
    Replies
    1. You could try to use hot glue from a glue gun, but you would need to keep the seams from opening up (the glue there would melt again with the hot glue) by putting binder clips or such all around it. Normal clear glue would probably not work, I tried once for a drink and that took months to dry and in the end nothing was left. If you find another solution, post it here, I would love to hear it.
      Good luck !

      Delete
  2. Could you use the snorkel nose idea to create a hospital mask? And make a hole at the top and glue
    Elastic cord at the top. That's my plan, of course it would be shaped differently. Oh and could you make the scrubs?

    ReplyDelete
  3. sooo cool! i have been wanting to make a hospital for a long time, and your tutorials were the best i could find!!!
    thank you!

    ReplyDelete
  4. This will be great next hospital visit. Grace already has a NoNo, nasal gastric tube and wrist band. Also the nurse last time gave her a new born t-shirt.

    ReplyDelete
  5. this is so cool. what can I use instead of acrylic water?


    ReplyDelete
  6. What can you use instead of a wooden dowel?

    ReplyDelete
    Replies
    1. You can use the straight piece of a plastic hanger, the cheap round ones.

      Delete
  7. Do you how to make oxegen mask

    ReplyDelete
  8. i like it a lot!!! I really needed it my doll is getting treatment

    ReplyDelete